Huawei Router B160 User Manual

HUAWEI B160  
Fixed Wireless Terminal  
USER GUIDE  
 
Introduction  
Note:  
The figures of the FWT (Fixed Wireless Terminal) are only for your reference, please refer  
color and shape to product.  
Front view  
1
2
3
4
5
11  
10  
9
8
7
6
No.  
Item  
Description  
y Access the main Menu in standby mode.  
y Select the option displayed on the lower left corner of the  
screen.  
1
Left soft key  
y Access the shortcut screen in standby mode.  
y Adjust the volume during a call.  
2
Scroll keys  
y Access the Contacts screen in standby mode.  
3
4
Right soft key  
y Select the option displayed on the lower right corner of the  
screen.  
y Access the main Menu in standby mode.  
OK key  
y Select the option displayed on the lower left corner of the  
display screen.  
y Speed dial a phone number.  
y Select Settings > Phone settings > Shortcuts to assign a  
shortcut key to a phone number.  
5
6
Shortcut keys  
End key  
y End a call or reject an incoming call.  
y Press and hold it to power on or off.  
y Return to the standby mode.  
1
 
No.  
7
Item  
Description  
y Make or answer a call without lifting the handset.  
y Cancel the dialing that is in hands-free mode.  
y End the call that is in hands-free mode.  
Hands-free key  
y Make or answer a call.  
y View dialed calls in standby mode.  
8
9
Call/Redial key  
y Press and hold it to switch between the silent and normal  
profiles.  
# key  
y Switch on or off the input mode of T9 in editing mode.  
y Mark or unmark a record.  
y Press and hold it to lock the keyboard in standby mode.  
y Switch between different input methods in editing mode.  
Enter numbers and characters.  
10  
11  
* key  
Number keys  
Back View and Side View  
2
4
3
1
5
6
7
1
2
3
4
8
9
10  
No.  
Item  
No.  
Item  
1
3
5
7
9
Antenna jack  
Headset jack  
2
4
6
8
Data port  
Power jack  
Wall-mounting brackets  
Coiled cord jack on main unit  
SIM card slot  
Battery container  
Battery container cover  
Battery cord jack  
10  
2
 
Icons  
Icon  
Description  
Icon  
Description  
Network signal strength  
Calling  
Alarm clock is on  
Message received  
Voice message received  
Keypad lock  
No service  
Hands-free mode  
Powered by power adapter  
Battery power level  
3G network  
In silent profile  
Line 2 is selected  
Menu Tree  
Contacts  
Messages  
Call Log  
1. Missed  
1. Phone  
1. Write SMS  
2. Inbox  
2. Received  
3. Dialed  
2. SIM  
3. Groups  
3. Drafts  
4. Calls status  
5. Delete all  
4. Speed Dial Number  
5. Copy all  
4. Sent  
5. Settings  
6. Delete all  
7. Memory status  
6. Delete all  
7. Settings  
8. Memory status  
Tools  
Porfiles  
Settings  
1. Alarms  
1. Normal  
1. Phone settings  
2. Display settings  
3. Call settings  
4. Network  
2. Calendar  
3. Calculator  
4. Word Time  
2. Silent  
3. Activity  
4. My profile 1  
5. My profile 2  
5. Security  
Using the Menu  
1. In the standby mode, press Left soft key to display the main menu.  
2. Press  
or  
to move around the menus, and then press Left soft key to select  
items.  
3. If the menu contains further submenus, repeat Step 2.  
3
 
4. Use the selected function according to the prompts on the screen.  
5. Press Right soft key to return to the previous menu.  
6. Press  
to return to the standby mode.  
Installation  
Installing the SIM Card  
Caution:  
The SIM card and its golden contact can be easily damaged by a scratch or bend. Be careful  
when installing or removing the SIM card.  
Power off the device and remove the power supply cable. Install the SIM card according to the  
following figure. Make sure that the golden contact on the SIM card is facing downwards.  
Installing the Battery  
Power off the device and remove the power supply cable. Install the battery according to the following  
figure. Make sure that the battery cord plug matches the battery jack. Do not insert the battery  
reversely.  
Installing the Power Adapter  
1. Install the battery based on the battery installation steps.  
2. Connect one end of the power adapter cable to the device and the other to the power socket.  
4
 
3. The battery charging icon is displayed on the screen. The battery charging icon becomes static  
when the battery is fully charged.  
Note:  
y Remove the battery if the device is left unused for a long period.  
y If the battery has not been used for a long time or the battery is exhausted, the screen of  
the device may not function when you charge the battery again. This is normal. After the  
battery is being charged for a while, you can power on the device for use.  
Installing the Headset (Optional)  
The device supports headset jack. For the choice of your headset, consult your service provider.  
Call  
Making a Call  
1. Enter or edit a number in one of the following ways:  
y Enter a phone number through the keypad.  
y Select a number from Call Log.  
y Select a number from Contacts.  
2. Press  
3. Press  
to dial.  
to end the call.  
Answering a Call  
When there is an incoming call, press  
,
, Left soft key or lift the handset to answer it.  
Press  
to reject it.  
5
 
Message  
Creating a Message  
1. Select Messages > Write SMS.  
2. In the message editing screen, select Options to perform operations in the option list.  
3. After editing the message, press  
key to add a recipient’s number.  
4. Press key to send the message.  
Note:  
The maximum number of English letters in a single text message is 160. If the characters  
you entered exceed this limit, the text is divided into two or more continuous messages  
when it is sent.  
Viewing a Message  
The inbox stores received messages.  
1. Select Menu > Messages > Inbox.  
2. Press  
3. Press  
/
to scroll the messages.  
key to view the message.  
4. Press Left soft key to reply, delete, or forward a short message, or call or save the phone  
number of a message.  
Input Modes  
Note:  
y Press * key to switch between input methods.  
y Press # key to enable or disable T9 method.  
y Press 1 key to display the list of symbol.  
y Press Right soft key to delete the letter in front of the cursor.  
T9 Input Method  
Press each key carrying the desired letter once, and then the predictive text scheme will present the  
available words composed by the letters you have entered in the drop-down list.  
Traditional Input Method  
When T9 input method is off, you can use the traditional input method. Repeatedly press the key that  
carries the letter to be entered when it appears on the screen.  
"123" Numeric Input Method  
In a text editing screen, press and hold the character/number keys to enter corresponding numeric  
characters.  
You can also press successively the * key to switch to the "123" numeric input method, and enter  
corresponding numeric characters by pressing the character/number keys.  
6
 
Symbol Input Method  
Your device provides an independent symbol input method.  
For example, to enter ":" with the symbol input method, you can just press the scroll keys to select ":"  
from the symbol list and then press  
.
Inputting Different Languages  
In editing mode, select Options > Input language to set the language for the text.  
Data Service  
Connecting the Device to a PC  
The device can be connected to a PC to provide data services. You need to purchase the data service  
suite. For details, consult your service provider.  
Note:  
y Power off the device and then disconnect it from the power adapter before connecting.  
y Use the data service suite provided by the manufacturer.  
Installing the Management Program  
This section introduces how to install the management program and the hardware driver. The  
procedures are for your reference only.  
1. Connect the FWT to a PC with a compatible USB cable.  
2. The system finds the new hardware and installs the modem driver automatically.  
3. The installation program automatically starts, and then the installation interface is displayed.  
4. Follow the instructions of the installation program.  
5. When the installation completes, a shortcut icon of the FWT management program is displayed  
on the desktop.  
Note:  
The operating system configuration requirement of a PC: Windows 2000, Windows XP,  
Windows Vista (32-bit or 64-bit).  
Applying the Data Service  
You can apply and enjoy such data services as Web browse. For details, consult your service  
provider. The procedures are for your reference only.  
1. Double click the newly created FWT Partner icon.  
7
 
2. Click Settings, and then select New to create a new profile.  
3. Enter the relative setting information and save the profile, click OK.  
4. Click Connect to dial up. After the login completes, you can access the Internet.  
Note:  
y The profile information varies with networks. For details, consult your service provider.  
y The connection rate shown after the dial-up is the connection rate of the data port. For  
details, consult your service provider.  
Security  
You can change the settings related to the device security. Select Settings > Security, and then  
select the following security setting items.  
Reset  
This option is used to reset user configurations of the device settings to the factory settings.  
Password Lock  
This option is used to enable or disable Phone lock and PIN lock.  
Change Password  
1. Select Security > Change password.  
2. Select one item.  
3. Enter the old password (The initial phone password is 0000).  
4. Enter a new password.  
5. Enter the new password again to confirm.  
Note:  
y To modify the PIN code, you must set PIN lock to On firstly.  
y If you enter the wrong PIN or PIN2 for three times, the SIM card is locked. You need the  
PUK or PUK2 code to unlock the SIM card. If you enter the wrong PUK or PUK2 code for  
10 times in total, the SIM card is locked permanently.  
y The PUK or PUK2 code is delivered with the SIM card. If you do not receive the code or  
forget it, contact your service provider.  
Warnings and Precautions  
This section contains important information pertaining to the operating instructions of your device. It  
also contains information about how to use the device safely. Read this information carefully before  
using your device.  
Electronic Device  
Power off your device if using the device is prohibited. Do not use the device when using the device  
causes danger or interference with electronic devices.  
8
 
Medical Device  
y Follow rules and regulations set forth by hospitals and health care facilities. Do not use your device  
when using the device is prohibited.  
y Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between  
a device and a pacemaker to prevent potential interference with the pacemaker. If you are using a  
pacemaker, use the device on the opposite side of the pacemaker and do not carry the device in  
your front pocket.  
y Some wireless devices may affect the performance of hearing aids. For any such problems,  
consult your service provider.  
Potentially Explosive Atmosphere  
Power off your device in any area with a potentially explosive atmosphere, and comply with all signs  
and instructions. Areas that may have potentially explosive atmospheres include the areas where you  
would normally be advised to turn off your vehicle engine. Triggering of sparks in such areas could  
cause an explosion or a fire, resulting in bodily injuries or even deaths. Do not power on your device  
at refueling points such as service stations. Comply with restrictions on the use of radio equipment in  
fuel depots, storage, and distribution areas, and chemical plants. In addition, adhere to restrictions in  
areas where blasting operations are in progress. Before using the device, watch out for areas that  
have potentially explosive atmospheres that are often, but not always, clearly marked. Such locations  
include areas below the deck on boats, chemical transfer or storage facilities, and areas where the air  
contains chemicals or particles such as grain, dust, or metal powders. Ask the manufacturers of  
vehicles using liquefied petroleum gas (such as propane or butane) whether this device can be safely  
used in their vicinity.  
Traffic Security  
y Do not use your device while driving, and observe the local laws and regulations.  
y Do not use your device while flying in an aircraft. Power off your device before boarding an aircraft.  
Using wireless devices in an aircraft may cause danger to the operation of the aircraft and disrupt  
the wireless telephone network. It may also be considered illegal.  
Operating Environment  
y Do not use or charge the device in dusty, damp, and dirty places or places with magnetic fields.  
Otherwise, it may result in a malfunction of the circuit.  
y On a stormy day with thunder, do not use your device, to prevent any danger caused by lightning.  
y When you are on a call, do not touch the antenna. Touching the antenna affects the call quality and  
results in increase in power consumption. As a result, the talk time and the standby time are  
reduced.  
y Use accessories authorized by the manufacturer. Using unauthorized accessories will render the  
warranty null and void.  
y Because the device needs to disperse heat during working, place the device and the power supply  
in a ventilated and shady place. Never cover the device, put objects on it, or place it near water, fire  
as well as inflammable and explosive materials.  
y The antenna(s) used for this transmitter must be installed by keeping a minimum distance of 20 cm  
from all persons.  
y Keep the ambient temperature between -10°C and 45°C while the device is being charged. Keep  
the ambient temperature between -10°C to 55°C for using the device powered by a battery.  
Safety of Children  
Comply with all precautions with regard to children's safety. Letting the child play with your device or  
its accessories, which may include parts that can be detached from the device, may be dangerous, as  
it may present a choking hazard. Ensure that small children are kept away from the device and  
accessories.  
9
 
Accessories  
Use the accessories delivered only by the manufacturer. Using accessories of other manufacturers or  
vendors with this device model may invalidate any approval or warranty applicable to the device,  
result in the non-operation of the device, and cause danger.  
Battery and Charger  
y Unplug the charger from the electrical plug and the device when not in use.  
y Do not connect two poles of the battery with conductors, such as metal materials, keys, or  
jewelries. Otherwise, the battery may be short-circuited and may cause injuries and burns on your  
body.  
y Do not disassemble the battery or solder the battery poles. Otherwise, it may lead to electrolyte  
leakage, overheating, fire, or explosion.  
y If battery electrolyte leaks out, ensure that the electrolyte does not touch your skin and eyes. When  
the electrolyte touches your skin or splashes into your eyes, wash your eyes with clean water  
immediately and consult a doctor.  
y If there is a case of battery deformation, color change, or abnormal heating while you charge or  
store the battery, remove the battery immediately and stop using it. Otherwise, it may lead to  
battery leakage, overheating, explosion, or fire.  
y If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens,  
stop using the cable at once. Otherwise, it may lead to an electric shock, a short circuit of the  
charger, or a fire.  
y Do not dispose of batteries in fire as they may explode. Batteries may also explode if damaged.  
Cleaning and Maintenance  
y The device, battery, and charger are not water-resistant. Keep them dry. Protect the device, battery,  
and charger from water or vapor. Do not touch the device or the charger with a wet hand.  
Otherwise, it may lead to a short circuit, a malfunction of the device, and an electric shock to the  
user.  
y Do not place your device, battery, and charger in places where they can get damaged because of  
collision. Otherwise, it may lead to battery leakage, device malfunction, overheating, fire, or  
explosion.  
y Do not place magnetic storage media such as magnetic cards and floppy disks near the device.  
Radiation from the device may erase the information stored on them.  
y Do not leave your device, battery, and charger in a place with an extreme high or low temperature.  
Otherwise, they may not function properly and may lead to a fire or an explosion.  
y Do not place sharp metal objects such as pins near the earpiece. The earpiece may attract these  
objects and hurt you when you are using the device.  
y Before you clean or maintain the device, power off the device and disconnect it from the charger.  
y Do not use any chemical detergent, powder, or other chemical agents (such as alcohol and  
benzene) to clean the device and the charger. Otherwise, parts of the device may be damaged or a  
fire can be caused. You can clean the device and the charger with a piece of damp and soft  
antistatic cloth.  
y Do not dismantle the device or accessories. Otherwise, the warranty on the device and  
accessories is invalid and the manufacturer is not liable to pay for the damage.  
Emergency Call  
You can use your device for emergency calls in the service area. The connection, however, cannot be  
guaranteed in all conditions. You should not rely solely on the device for essential communications.  
10  
 
Disposal and Recycling Information  
This symbol on the device (and any included batteries) indicates that they should not  
be disposed of as normal household garbage. Do not dispose of your device or  
batteries as unsorted municipal waste. The device (and any batteries) should be  
handed over to a certified collection point for recycling or proper disposal at the end of  
their life.  
For more detailed information about the recycling of the device or batteries, contact  
your local city office, the household waste disposal service or the retail store where  
you purchased this device.  
The disposal of this device is subject to the Waste from Electrical and Electronic Equipment (WEEE)  
directive of the European Union. The reason for separating WEEE and batteries from other waste is  
to minimize the potential environmental impacts on human health of any hazardous substances that  
may be present.  
Reduction of Hazardous Substances  
This device is compliant with the EU Registration, Evaluation, Authorisation and Restriction of  
Chemicals (REACH) Regulation (Regulation No 1907/2006/EC of the European Parliament and of  
the Council) and the EU Restriction of Hazardous Substances (RoHS) Directive (Directive  
2002/95/EC of the European Parliament and of the Council). For more information about the REACH  
recommended to visit the Web site regularly for up-to-date information.  
EU Regulatory Conformance  
Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential  
requirements and other relevant provisions of Directive 1999/5/EC.  
0168  
Notice: Observe the national local regulations in the location where the device is to be used. This  
device may be restricted for use in some or all countries of European Union.  
Version: V100R001_01 Part Number: 31010BQP  
11  
 

Graco Septic System 3A1938E User Manual
Hamilton Electronics Cassette Player HA 802 User Manual
Harbor Freight Tools Saw 91815 User Manual
Harbor Freight Tools Washer 35740 User Manual
Harman Kardon Stereo System HK3490 User Manual
Hasselblad Camera Lens CFi 35 100 User Manual
Healthrider Treadmill HATL512050 User Manual
Hotpoint Dishwasher FDW85 User Manual
Hotpoint Double Oven 6192 User Manual
Hypertec Carrying Case S Series User Manual