Acer Aspire L200 User Manual

Aspire L series  
User's Guide  
Remark: All images are for reference purposes only.  
Actual configuration may vary.  
1
System tour  
Your computer consists of the following:  
Front panel  
#
1
3
5
Item  
#
2
4
6
Item  
Optical drive eject button  
Power button  
4 USB 2.0 ports  
Slot-loading optical drive  
Front-access cover  
4-pin IEEE 1394 port  
Rear panel  
#
1
Item  
#
2
Item  
PS/2 mouse  
port  
PS/2 keyboard  
port  
3
TV-out  
4
7
S-video out  
5
8
Parallel port  
6
9
VGA port  
6-pin IEEE  
1394 port  
4 USB 2.0 ports  
Ethernet (RJ-45)  
port  
10  
S/PDIF out  
11  
Microphone jack  
12  
15  
Line-out/  
headphone jack  
13  
16  
Line-in jack  
Antenna-in  
14  
17  
S-video out  
DC-in  
TV-out  
     
2
System tour  
System features  
Performance  
AMD Athlon64 (FX) socket-939 processor  
DDR-SDRAM PC3200, expandable to a maximum of 4 GB  
Power management functionality  
Slot-loading DVD/CD writer  
High-capacity SATA HDD  
Supports USB 2.0 high-performance peripherals  
Multimedia  
Stereo-surround audio system via onboard audio controller  
Audio-in/line-in, audio-out/line-out, headphone-out and  
external microphone-in jacks  
Connectivity  
PS/2 mouse and keyboard ports  
External monitor (VGA) port  
Composite TV-out connector  
S-video connector  
SPDIF-out connector  
Parallel port  
8 USB 2.0 ports  
Ethernet (RJ-45) LAN port  
4-pin (front) and 6-pin (rear) IEEE 1394 ports  
       
3
System peripherals  
The Aspire L series computer consists of the system itself and system  
peripherals, like input devices or a set of speakers (optional). This  
section provides a brief description of basic system peripherals.  
Wireless keyboard with built-in pointing device  
The wireless keyboard provides all the functionality of a standard  
keyboard and includes a built-in pointing device. Connect the  
keyboard receiver to a USB port and place the receiver so that it is in  
line-of-sight of the keyboard.  
Remote control  
Connect the remote control receiver to a USB port and place the  
receiver so that it is in line-of-sight of the remote control.  
Note: All images are for reference purposes only.  
Actual configuration may vary.  
     
4
Setting up your computer  
Setting up your computer  
The Aspire L series is a versatile and powerful system, supporting an  
AMD CPU. The computer uses a state-of-the-art bus architecture, which  
improves system efficiency and helps the system support varied  
multimedia and software applications.  
Your Aspire L series has standard I/O (input/output) interfaces such as a  
parallel port, PS/2 ports, USB ports, IEEE 1394 ports, microphone, stereo  
line-in and line-out jacks. The system can accommodate extra  
peripheral equipment through these I/O ports.  
®
®
Furthermore, the system is compatible with the Microsoft Windows  
XP Media Center Edition operating system.  
Necessary to know before setup  
Selecting a location  
Selecting the optimum location for your computer:  
Do not place the system too close to other electrical equipment.  
Do not place the system in high-traffic areas or where the power  
cord or other cords may be stepped on.  
Avoid placing the system in any location that is excessively dusty  
or damp.  
Do not stack other equipment on top of the system.  
Do not block system ventilation.  
Opening the package  
Open the package carefully and keep all packing materials for  
later use.  
       
5
Ensure that all items are present and in good condition. If any of the  
following items are missing or appear damaged, contact your  
dealer immediately:  
Aspire L series system  
Wireless keyboard with built-in pointing device  
Remote control  
Starter poster  
Other user documentation and third-party software.  
Connecting peripherals  
After everything is connected, plug the power cord into the system and  
insert the other end into a power outlet.  
Note: Don't connect the system power cord before connecting all  
peripherals to the system.  
Starting your computer  
After connecting all the peripheral equipment, start your computer  
according to the steps below:  
1
Turn on all peripheral equipment, such as the monitor, printer,  
speakers, etc.  
2
Turn on the system. Once the start up process is complete, you can  
begin to use your computer.  
Shutting down your computer  
From the "Start" menu, select "Shut Down" and click OK.  
In the event of a system crash, press and hold the power button on the  
front of the system for four seconds. After the system has shut down,  
turn off all peripheral devices.  
     
6
Setting up your computer  
Using Microsoft® Windows® XP  
Media Center Edition  
Getting started  
®
There are two ways to open Windows XP Media Center Edition:  
1
Use your mouse to open the Start menu by clicking on the start  
icon in the bottom left hand of your Windows desktop. Then select  
Media Center from the Start menu or from your list of programs.  
2
Press the green Start button on your Windows Media Centre  
remote control (selected models only).  
My Music  
With Media Center, it is possible to copy CDs, create playlists, organize  
your music library, and create queues to play your favorite tunes.  
To create a playlist:  
1
2
First, Start Media Center using the remote or a mouse.  
Select My Music, and then navigate to select the music you wish to  
add to the list.  
3
Press OK, then choose Add to Queue. Confirmation is then  
displayed to show the music was added to the queue.  
   
7
My TV (selected models only)  
With My TV it is possible to find and record your favorite shows using  
the program guide (selected regions only). It is also possible to record a  
show while watching another prerecorded show.  
To watch a recorded show  
1
2
Select My TV, then Recorded TV.  
Navigate to select the name of the recording you wish to watch,  
then press Play.  
Play DVDs  
Your Acer Media Center Edition PC has all the functionality of a  
conventional DVD player.  
My Pictures  
Using My Pictures you can create a slide show to view your favorite  
photos or burn a disk of your holiday snaps to send to your relatives.  
To Zoom and Pan a picture  
1
2
3
4
Press the Start button, then select My Pictures.  
Press OK, then select the image you wish to view.  
Use the OK button to zoom in, press it again to zoom in further.  
Use the arrow buttons to pan the image.  
Radio (selected models only)  
Use Radio to manage and listen to your favorite FM and Internet radio  
stations.  
Note: A radio tuner card must be installed to enable the FM radio  
functions.  
My Videos  
Watch digital video that you have created or downloaded from the  
Internet.  
8
Setting up your computer  
Help and support  
Answers to many of your questions can be found in the help section.  
To open the Help section:  
1
2
Start up Media Center and then select Settings (by pressing More  
on your remote or right-clicking the mouse)  
Select the Help option, then choose what kind of help you need.  
 
9
Troubleshooting  
The following are possible situations that may arise during the use of  
your computer, and each is followed by simple answers and solutions.  
Q: I pressed the power switch but the system did not boot up.  
A: Check the LED located around the power switch.  
If the LED is not lit, no power is being applied to the system. Do any of  
the following:  
Check if the voltage selector switch located on the rear panel of  
the computer is set to the correct voltage.  
Check if you have properly plugged the power cable into an  
electrical outlet.  
If you are using a power strip or AVR, make sure it is plugged in  
and turned on.  
If the LED is lit, check the following:  
Is a non-bootable (non-system) optical disk in the optical drive?  
If yes, remove or replace it with a system optical disk and press  
<Ctrl> + <Alt> + <Del> to restart your computer.  
Q: Nothing appears on the screen.  
A: Your computer's power management function automatically  
blanks the screen to save power. Press any key to turn the display  
back on.  
If pressing a key does not work, restart your computer. If restarting  
your computer does not work, contact your dealer or the technical  
support center for assistance.  
Q: The printer does not work.  
A: Do the following:  
Make sure the printer is connected to a power outlet and that it is  
turned on.  
Make sure the printer cable is connected securely to the system's  
parallel port and the corresponding port on the printer.  
For additional information concerning the printer, refer to the  
printer's documentation.  
 
10  
Troubleshooting  
Q: No sound comes out of the speakers.  
A: Check the following:  
The volume may be muted. Look for the Volume icon on the  
taskbar. If it is crossed-out, click on the icon and deselect the mute  
option. You can also press the volume control/mute knob on your  
USB keyboard to toggle the mute function.  
If headphones, earphones or external speakers are connected to  
the line-out jack of your computer, the internal or built-in  
speakers are automatically turned off.  
Q: System cannot read hard disk, CD or DVD information.  
A: Check the following:  
Make sure you are using the correct type of media.  
Make sure the CD or DVD is inserted correctly (rightside up) into  
the proper drive.  
Check to be sure the CD or DVD is clean and unscratched.  
Check your drive by using a good (undamaged) optical disk. If your  
CD or DVD drive cannot read the information on the good CD or  
DVD, there may be a problem with the drive. Contact your dealer  
or technical support center for assistance.  
Q: System cannot write to hard disk or optical disk.  
A: Check the following:  
Make sure the media is not write-protected.  
Make sure you are using the correct type of optical disk.  
11  
Taking care of your computer  
Please read the instructions listed in this section. Following these  
instructions will help you maximize the durability of your computer.  
Important tips  
Do not place other equipement on top of the computer.  
Do not block system ventilation.  
Do not expose the computer to direct sunlight. Do not place it  
near sources of heat, such as a radiator.  
Do not subject the computer to magnetic fields.  
Do not expose the computer to rain or moisture.  
Do not spill water onto or into the computer.  
Do not subject the computer to heavy shock or vibration.  
Do not expose the computer to dust or dirt.  
Never place the system on uneven surfaces.  
Do not step on the power cord or place heavy objects on top of it.  
Carefully route the power cord and any cables away from  
foot traffic.  
When unplugging the power cord, do not pull on the cord itself  
but pull on the plug.  
The total ampere rating of the equipment plugged in should not  
exceed the ampere rating of the cord, if you are using an  
extension cord. Also, the total current rating of all equipment  
plugged into a single wall outlet should not exceed the  
fuse rating.  
Check the documentation that came with your software and/or  
drivers to see if you can select other settings to make viewing the  
screen more comfortable.  
   
12  
Taking care of your computer  
Cleaning and servicing  
To clean your computer and keyboard  
1
Turn off the computer and unplug the power cord.  
2
Use a soft cloth moistened with water and gently wipe the exterior  
of the computer and the keyboard. Do not use liquid or aerosol  
cleaners.  
When to contact a service technician  
If you drop and damage the computer.  
If liquid has been spilled into the computer.  
If the computer is not operating normally.  
Asking for technical assistance  
For technical assistance, contact your local dealer or distributor.  
You may also access the Acer Web site (http://www.acersupport.com)  
for information on how and where to contact the service centers  
available in your area.  
       
13  
Declaration of conformity for EU countries  
Acer hereby declares that this personal computer is in compliance with the essential  
requirements and other relevant provisions of Directive 1999/5/EC.  
Notice: Shielded cables  
All connections to other computing devices must be made using shielded cables  
to maintain compliance with FCC regulations.  
Notice: Peripheral devices  
Only peripherals (input/output devices, terminals, printers, etc.) certified to  
comply with the Class B limits may be attached to this equipment. Operation  
with non-certified peripherals is likely to result in interference to radio and TV  
reception.  
Modem notices  
TBR 21  
This equipment has been approved [Council Decision 98/482/EC - "TBR 21"] for  
pan-European single terminal connection to the Public Switched Telephone  
Network (PSTN). However, due to differences between the individual PSTNs  
provided in different countries, the approval does not, of itself, give an  
unconditional assurance of successful operation on every PSTN termination  
point. In the event of problems, you should contact your equipment supplier in  
the first instance.  
Important safety instructions  
Read these instructions carefully. Save them for future reference.  
1
2
Follow all warnings and instructions marked on the product.  
Unplug this product from the wall outlet before cleaning. Do not use  
liquid cleaners or aerosol cleaners. Use a water-moistened cloth for  
cleaning.  
3
4
Do not use this product near water.  
Do not place this product on an unstable cart, stand or table. If the product  
falls, it could be seriously damaged.  
5
Slots and openings are provided for ventilation to ensure reliable  
operation of the product and to protect it from overheating. These  
openings must not be blocked or covered. The openings should never be  
blocked by placing the product on a bed, sofa, rug or other similar surface.  
       
14  
6
This product should never be placed near or over a radiator or heat  
register, or in a built-in installation unless proper ventilation is provided.  
This product should be operated from the type of power indicated on the  
marking label. If you are not sure of the type of power available, consult  
your dealer or local power company.  
7
8
Do not allow anything to rest on the power cord. Do not locate this  
product where people will walk on the cord.  
If an extension cord is used with this product, make sure that the total  
ampere rating of the equipment plugged into the extension cord does not  
exceed the extension cord ampere rating. Also, make sure that the total  
rating of all products plugged into the wall outlet does not exceed the fuse  
rating.  
9
Never push objects of any kind into this product through cabinet slots as  
they may touch dangerous voltage points or short-out parts that could  
result in a fire or electric shock. Never spill liquid of any kind onto or into  
the product.  
10 Do not attempt to service this product yourself, as opening or removing  
covers may expose you to dangerous voltage points or other risks. Refer all  
servicing to qualified service personnel.  
11 Unplug this product from the wall outlet and refer servicing to qualified  
service personnel under the following conditions:  
a
b
c
When the power cord or plug is damaged or frayed.  
If liquid has been spilled into the product.  
If the product has been exposed to rain or water.  
d
If the product does not operate normally when the operating  
instructions are followed. Adjust only those controls that are covered  
by the operating instructions, since improper adjustment of other  
controls may result in damage and will often require extensive work  
by a qualified technician to restore the product to normal condition.  
e
f
If the product has been dropped or the case has been damaged.  
If the product exhibits a distinct change in performance, indicating a  
need for service.  
12 Use only the proper type of power supply cord set (provided in your  
accessories box) for this unit. It should be a detachable type : UL listed/CSA  
certified, type SPT-2, rated 7A 125V minimum, VDE approved or its  
equivalent. Maximum length is 15 feet (4.6 meters).  
13 Always disconnect all telephone lines from the wall outlet before serving  
or disassembling this equipment.  
15  
14 Avoid using a telephone line (other than the cordless type) during an  
electrical storm. There may be a remote risk of electric shock from  
lightning.  
Lithium battery statement  
CAUTION  
Danger of explosion if battery is incorrectly replaced. Replace only with  
the same or equivalent type recommended by the manufacturer.  
Dispose of used batteries according to local regulations. Recycle if  
possible.  
ADVARSEL!  
Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning  
må kun ske med batteri af samme fabrikat og type. Léver det brugte  
batteri tilbage til leverandøren.  
ADVARSEL  
Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme  
batteritype eller en tilsvarende type anbefalt av apparatfabrikanten.  
Brukte batterier kasseres i henhold til fabrikantens instruksjoner.  
VARNING  
Explosionsfara vid felaktigt batteribyte. Anvãnd samma batterityp  
eller en ekvivalent typ som rekommenderas av apparattillverkaren.  
Kassera anvãnt batteri enligt fabrikantens instruktion.  
VAROITUS  
Päristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo  
ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty  
paristo valmistajan ohjeiden mukaisesti.  
VORSICHT!  
Explosionsgefahr bei unsachgemäßen Austausch der Batterie Ersatz  
nur durch denselben oder einem vom Hersteller empfohlenem  
ähnlichen Typ. Entsorgung gebrauchter Batterien nach Angaben des  
Herstellers.  
 
16  
Laser compliance statement  
The CD or DVD drive used with this computer is a laser product. The CD  
or DVD drive's classification label (content shown below) is located on  
the drive.  
CLASS 1 LASER PRODUCT  
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE  
TO BEAM.  
APPAREIL A LASER DE CLASSE 1 PRODUIT  
LASERATTENTION: RADIATION DU FAISCEAU LASER INVISIBLE EN CAS  
D’OUVERTURE. EVITTER TOUTE EXPOSITION AUX RAYONS.  
LUOKAN 1 LASERLAITE LASER KLASSE 1  
VORSICHT: UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET  
NICHT DEM STRAHLL AUSSETZEN  
PRODUCTO LÁSER DE LA CLASE I  
ADVERTENCIA: RADIACIÓN LÁSER INVISIBLE AL SER ABIERTO. EVITE EXPONERSE  
A LOS RAYOS.  
ADVARSEL: LASERSTRÅLING VEDÅBNING SE IKKE IND I STRÅLEN.  
VARO! LAVATTAESSA OLET ALTTINA LASERSÅTEILYLLE.  
VARNING: LASERSTRÅLNING NÅR DENNA DEL ÅR ÖPPNAD ÅLÅ TUIJOTA  
SÅTEESEENSTIRRA EJ IN I STRÅLEN  
VARNING: LASERSTRÅLNING NAR DENNA DEL ÅR ÖPPNADSTIRRA EJ IN I  
STRÅLEN  
ADVARSEL: LASERSTRÅLING NAR DEKSEL ÅPNESSTIRR IKKE INN I STRÅLEN  
 
17  
Declaration of conformity for CE marking  
Name of manufacturer:  
Acer Inc.  
Address of manufacturer:  
8F, 88, Sec. 1, Hsin Tai Wu Rd.  
Hsichih, Taipei Hsien 221  
Taipei, Taiwan  
Declares that product:  
Model:  
Personal computer  
Aspire series  
Conforms to the EMC Directive 89/336/EEC as attested by conformity  
with the following harmonized standards:  
EN55022:1998/A1: 2000; AS/NZS CISPR 22: 2002: Limits and methods of  
measurement of radio interference characteristics of information  
technology equipment  
EN55024: 1998/A1: 2001; AS/NZS CISPR 24: 1997: Information  
technology equipment - immunity characteristics -- limits and methods  
of measurement Including:  
Standard  
Description  
Results Criteria  
EN61000-4-2: 1995/A1: 1998/A2: 2001 Electrostatic discharge  
AS/NZS 61000.4.2: 2002  
Pass  
Pass  
Pass  
Pass  
Pass  
Pass  
B
A
B
EN61000-4-3: 1996/A1: 1998/A2: 2001 Radio-frequency,  
AS/NZS 61000.4.3: 1999  
electromagnetic field  
EN61000-4-4: 1995/A1: 2001/A2: 2001 Electrical fast transient/burst  
AS/NZS 61000.4.4: 1999  
EN61000-4-5: 1995/A1: 2001  
AS/NZS 61000.4.5: 1999  
Surge  
B
EN61000-4-6: 1996/A1: 2001  
AS/NZS 61000.4.6: 1999  
Conductive disturbance  
Power frequency magnetic field  
A
A
EN61000-4-8: 1993/A1: 2001  
AS/NZS 61000.4.8: 2002  
EN61000-4-11: 1994/A1: 2001  
AS/NZS 61000.4.11: 1999  
Voltage dips / short interruption  
and voltage variation  
>95% in 10 ms  
30% in 500 ms  
>95% in 5000 ms  
Pass  
Pass  
Pass  
B
C
C
Standard  
Description  
Results  
Pass  
EN61000-3-2: 2000  
Limits for harmonics current emissions  
AS/NZS 61000.3.2: 2003  
 
18  
EN61000-3-3: 1995  
A1: 2001/ AS/NZS 61000.3.3: 1998  
Limits for voltage fluctuations and flicker in Pass  
low-voltage supply systems  
Conforms to the Low Voltage Directive 73/23/EEC as attested by  
conformity with the following harmonized standard:  
EN60950: 2000 3rd: Safety of Information Technology Equipment  
Including Electrical Business Equipment.  
This equipment has been approved by Council Decision 98/482/EC  
(CTR21) for pan-European single terminal connection to the Public  
Switched Telephone Network (PSTN).  
We, Acer Inc., hereby declare that the equipment bearing the trade  
name and model number specified above was tested conforming to  
the applicable rules under the most accurate measurement standards  
possible, and that all the necessary steps have been taken and are in  
force to assure that production units of the same equipment will  
continue to comply with the requirements.  
---------------------------  
Easy Lai, Director  
Acer Incorporated  

HP Hewlett Packard HP LCD Monitor LE1901WM User Manual
EverFocus ENVS1600 User Manual
Electrolux Thermaline 9CHG584141 User Manual
Directed Electronics OHD1502 User Manual
Cypress CY8C24223 User Manual
Cypress CY7C027AV User Manual
Black Box LH1500A ST R3 User Manual
Bertazzoni X906MFE User Manual
Belkin P74782UK User Manual
Asus E2898 User Manual